0.75L
Covers
40–60 sq ft
2 coats, absorbent wood
Best For
A door, a gate, a radiator, or a set of shutters in one bespoke colour.
MACHINE-TINTED COVER LACQUER · ART. 845
A cover lacquer matched to any NCS or RAL colour you specify.
LEINOS 845 is the Finishing Lacquer as a tint base — machine-tinted at our Delhi lab to any NCS or RAL reference. Silk-gloss, weather- and light-resistant and biocide-free, for exterior and interior woodwork, metal and stoneware.
Any NCS or RAL colourWeather- & light-resistantBiocide-freeMade in Germany
Mechanism & Use
How LEINOS 845 Finishing Lacquer Mix works.
A plant-oil cover lacquer, machine-tinted to your exact NCS or RAL colour, that builds an opaque, silk-gloss film — weather- and light-resistant, and biocide-free.
01
Any NCS or RAL, covered opaque
Machine-tinted at the Delhi lab to any NCS or RAL reference; titanium dioxide and light-stable pigments give high opacity and clean edge coverage, so the specified colour reads solid and the wood or metal is blocked out.
02
Plant-oil binder builds the film
A plant-oil binder oxidatively cures in air into a tough, silk-gloss cover film that flexes with the substrate instead of cracking.
03
Weather- and light-resistant
The cured film resists sun, rain and yellowing, and stays low-yellowing, indoors and out. The final gloss settles two to three weeks after application.
04
Biocide-free, made in Germany
No in-can biocides — made in Germany by Reincke Naturfarben, and declared in full (it contains cobalt octoate as a drier, a possible allergen named on the label).
Where It Lives
Where 845 lives
Windows and doors
Dimensionally-stable joinery in a silk-gloss opaque colour.
Gates, sheds and soffits
Limited-dimensionally-stable exterior wood that moves with the seasons.
Fences, carports and palisades
Rough, non-dimensionally-stable outdoor structures.
Metal and steel
Railings, grilles, gates and balustrades — not galvanized or anodized.
Radiators and heating covers
A heat-stable silk-gloss finish for heating bodies.
Interior stairs and floors
Hard-wearing opaque colour on wooden treads and boards.
Compliance · EU · Origin
Declared in full. Made in Germany.
The honest anchors that let specifiers put 845 on exterior joinery, metalwork and radiators in a bespoke colour — no over-claiming.
845 is a film-forming lacquer, so a damaged coat is repaired by sanding the area back and re-lacquering — not spot-oiling. It is biocide-free and contains cobalt octoate as a drier (a possible allergen, declared on the label). The TDS is downloadable; the full SDS is available to architects and contractors on request — use Get Expert Advice above.
Read The Full TDSStep by Step
How to Apply
Prepare and prime — the surface must be dry, firm, clean, grease- and dust-free, and not absorbent. On exterior, old or damp-exposed wood, brush in one coat of Impregnation Wood Primer 150 first: the lacquer carries no fungicide, and 150 adds film protection against fungal attack to the wood. Then prime with LEINOS Resin Lacquer Primer 810. On metal, stoneware and dry interior wood, 810 alone; strongly absorbent interior wood is deep-primed with Priming Oil 220 first.
Sand the primer — once the primer has dried, sand with 150/180 grit and dust off to leave a smooth, even key for the lacquer.
Stir the tinted lacquer — stir 845 thoroughly before use; pigment and matting agents settle in storage. For coloured work, the primer can be tinted up to 10:1 with the lacquer so the colour comes up in fewer coats.
Apply the first coat — brush, roll or spray a thin, even coat (approx. 110–155 sq ft per litre). Protect the surface from rain, wind, direct sun and dew during drying.
Sand and second coat — after 24 hours (dust-dry approx. 8 h, grip-firm approx. 12 h), sand lightly with P180, dust off and apply the second coat. Keep the room well ventilated: the film cures by taking up oxygen.
Clean up and cure safely — clean tools with LEINOS Verdünnung 200 (thinner), not water. Store oil-soaked rags under water or in a sealed metal tin — self-ignition risk. Keep the tin cool, dry and frost-free. The final gloss settles over two to three weeks.
Coats & Recoating
- Sandable/overcoatable after 24 hours. Sand lightly (P180) between coats. Final gloss after 2-3 weeks.
Cleaning & Storage
- Clean tools immediately after use with LEINOS Verdünnung 200 (thinner). Do not use water.
- Store in a dry and cool place, protect from freezing. Shelf life in closed packaging is at least 2 years.
First time with Finishing Lacquer Mix? Our technical team runs complimentary on-site walkthroughs for contractors — full application protocol, start to finish.
System & Substrates
Prime with 150 and 810, then two coats of 845.
Outdoors, and on old or damp-exposed wood, the system starts with Impregnation Wood Primer 150, then Resin Lacquer Primer 810 and two coats of 845, machine-tinted to your NCS or RAL colour. On metal, stoneware and dry interior wood, 810 is the only primer.
The Coating System
Primer plus topcoat — the full chain.
First Coat845Finishing Lacquer Mix
Second Coat845Finishing Lacquer Mix
Substrate Fit
845 works on — and what it doesn’t.
Suitable
Recommended substrates
- Windows and doors — dimensionally-stable joinery
- Garden sheds, roof soffits and exterior gates
- Fences, carports and palisades
- Metal and steel — railings, grilles, gates
- Stoneware and mineral surfaces
- Radiators and heating covers
- Interior wooden stairs and floors
Honest Limits
Where to use a different product
- Anodized aluminium — the lacquer cannot key to the sealed oxide layer.
- Galvanized or zinc-coated surfaces — no reliable adhesion.
- For a clear finish that shows the wood grain instead of an opaque colour, use LEINOS 236 Terrace Wood Oil
- For a ready-stocked colour rather than a bespoke tint, use LEINOS 840 Finishing Lacquer
Use With Care
Working safely with 845
- Harmful to aquatic organisms, with long-lasting effect — avoid release to the environment.
- Contains cobalt octoate — may cause allergic reactions.
- Repeated contact may cause dry or cracked skin.
- Oil-soaked rags and materials can self-ignite — store under water or in a sealed metal container until disposal.
- Keep away from children.
- Wear respiratory protection when spraying; wear a fine-dust mask when sanding.
Coverage & Pack Sizes
Pick the right pack for the job.
Coverage assumes two coats over a primed surface. Absorbency and texture change the rate. Have an NCS or RAL reference? Share it with Request a Quote and we’ll tint it at our Delhi lab.
2.5L
Covers
140–195 sq ft
2 coats, absorbent wood
Best For
A windows-and-doors package, fences or railings in a specified colour — the most-specified size.
sq ft
Enter your area to see how much material — and the most efficient pack mix — you’ll need for 2 coats.
Full calculatorFull Declaration
Composition
Every ingredient declared on the label. The Trust Hub explains what each one does and the standards behind it.
Plant-oil binder
A plant-oil-based binder is the film former — it oxidatively cures in air into a tough, silk-gloss cover film that flexes with the substrate instead of cracking.
Titanium dioxide, pigments & mineral fillers
Titanium dioxide plus light-stable inorganic and organic pigments (dosed for your chosen NCS or RAL colour) and mineral fillers give the lacquer its high opacity, colour retention, clean edge coverage and silk-gloss body.
Aliphatic hydrocarbons
An aliphatic-hydrocarbon carrier flows the lacquer out level, then evaporates during cure. Clean tools with LEINOS Verdünnung 200, not water.
Drying agents (incl. cobalt octoate)
Metal-soap driers catalyse the oxidative cure. Cobalt octoate is one of them — a possible allergen, declared honestly on the label rather than hidden.
Got Questions?
Frequently Asked
Quick answers on formulation, application and Indian-climate suitability. Pulled from our full FAQ and TDS library.
- Oils penetrate the wood and enhance the natural grain, while lacquers form a protective film on the surface for higher mechanical resistance.
- Generally no. Lacquer requires a clean, untreated or sanded surface. Oil residues prevent proper adhesion of the lacquer film.
- Light sanding between coats (P220-P320) and applying thin, even layers are key. Avoid over-brushing to prevent visible brush marks.
- Yes. 845 is the Finishing Lacquer supplied as a tint base and machine-tinted at our Delhi lab to any NCS or RAL reference, so it matches an exact architectural colour rather than a stocked palette. All tones stay mutually mixable, and the silk-gloss film covers opaque so the specified colour reads solid on wood, metal or stoneware. The final gloss settles two to three weeks after application. Send us your NCS or RAL code via Get Expert Advice to start a custom-tint order.
- No. 845 contains cobalt octoate (a possible allergen) and an aliphatic-hydrocarbon solvent, so it is not toy-safe or food-safe. For children’s furniture use the water-based Wax Varnish 600; for food-contact or barefoot interior wood use a toy-safe finish such as Interior Hardwax Oil 290.
For Architects & Specifiers
Downloads
Technical and safety documents — citable in project specifications.
Need a Recommendation?
Talk to LEINOS
Four ways to reach our India team — pick the one that fits how you work.
For Trade & Specifiers
For Architects, Designers & Contractors
Full TDS / SDS library, specification support and trade pricing — direct from the manufacturer.
Documents
TDS / SDS
Per-product datasheets and safety sheets, downloadable in English.
Specification
NCS Match
Custom colour briefs and material samples mixed at our Delhi lab.
Trade
Direct Pricing
Volume tiers, project quoting and stock allocation through our trade desk.
Written by the LEINOS India technical team, in collaboration with
Reincke Naturfarben R&D, Lower Saxony.
Last updated
Want to represent LEINOS in your city?
Become a Dealer