Furniture
Dark Walnut Live-Edge Table Top
in Jaipur, Rajasthan
Live-edge walnut table top in Jaipur — finished with LEINOS Interior Hardwax Oil 290. Rich dark grain deepened toward lustrous brown-black, food-safe surface.

Context
The brief, and the surface.
A wide slab of walnut with natural live edges, hand-built in a Jaipur workshop. The walnut already carried deep colour variation between heartwood and sapwood — the oil needed to deepen the natural pigmentation without flattening the variation. LEINOS Interior Hardwax Oil 290 was applied with a cloth pad in two thin coats.
Cloth-pad application controls how much oil the open walnut grain takes — brushing pushes too much oil into the deeper grain channels, which would over-saturate the heartwood. The team worked end-grain first, then face grain, both with consistent pad pressure.
Conditions on Site
- Surface
- Interior live-edge walnut slab — natural heartwood-to-sapwood colour variation
- Climate & Exposure
- Rajasthan desert indoor — climate-controlled, low humidity, hot summers
- Limitations
- Cloth-pad application required — brushing over-saturates the heartwood grain channels
- Dining surface — recoat oil at 18-24 months under daily meal traffic
Gallery
More from the site.
Coating System
What we applied.
Products listed for reference. Suitability depends on your specific surface, climate, and condition.
Outcome
The result on site.
Live-edge walnut table top in Jaipur — LEINOS Interior Hardwax Oil 290 deepens the natural colour variation between heartwood (near-black) and sapwood (mid-brown) without flattening the grain contrast.
The oil deepened the walnut's natural colour variation, producing a rich, lustrous brown-black surface — the heartwood reading nearly black and the sapwood reading rich mid-brown. The grain contrast holds clearly under direct lighting; the surface wipes clean of food spills.
Results vary by surface condition, climate exposure, application method, and ongoing maintenance.
Documented by LEINOS India Specifier TeamUpdated 2026-05-16
For Architects & Contractors
Working on something similar? Specify .
Send us the project context — surface, area, finish intent, timeline. Our specifier team replies with a system spec and pack mix.






