Interior Wood

Turned Baluster Staircase with Golden Oak Finish

in Mumbai, Maharashtra

Mumbai, Maharashtra5 photos

Traditional turned-baluster interior staircase in Mumbai — finished with LEINOS Interior Hardwax Oil 290. Warm golden-amber tone, soft sheen highlighting the lathe-turned profile.

Traditional turned-baluster staircase in Mumbai — solid hardwood finished with LEINOS Interior Hardwax Oil 290 in warm golden-amber tone.

Context

The brief, and the surface.

A residential staircase with elaborately turned wooden balusters and matching handrail, set on solid hardwood treads. The piece needed an oil that would penetrate every curve of the lathe-turned profile without pooling in the bead-and-cove transitions. LEINOS Interior Hardwax Oil 290 was brushed onto the bare wood in two thin coats.

The team used a 25mm soft-bristle brush for the balusters — wide enough to cover the spindle face in one pass, narrow enough to follow the bead-and-cove without skipping. Hard-to-reach junctions at the rail base were cleaned up with a cloth before tack-free.

Conditions on Site

Surface
Interior solid hardwood staircase — turned balusters, handrail, hardwood treads
Climate & Exposure
Coastal Mumbai indoor — climate-controlled, seasonal humidity, salt-air loading
Limitations
  • Lathe-turned profile — brush size matched to bead-and-cove spacing for full coverage
  • Handrail high-touch surface — recoat at 18-24 months on the rail, every 3-5 years on the spindles

Gallery

More from the site.

  • Detail of a lathe-turned baluster spindle — bead-and-cove profile reading clearly under the oil's soft satin sheen.
  • Handrail close-up with hand-rubbed satin finish — high-touch surface protected by Hardwax Oil 290.
  • Stair tread and riser junction — uniform golden-amber tone with no pooling at the spindle base.
  • Wide view of the staircase under raking window light — lathe-turned profile clearly defined across the run.

Coating System

What we applied.

Products listed for reference. Suitability depends on your specific surface, climate, and condition.

Outcome

The result on site.

Turned-baluster staircase in Mumbai — LEINOS Interior Hardwax Oil 290 highlights the lathe-turned profile with golden-amber tone and a soft sheen that reads clearly under raking light.

The balusters and treads display a rich golden-amber tone with a soft sheen that highlights the lathe-turned profiles. Beads and coves read clearly under raking light from the stair-window above. No pooling visible at the spindle bases.

Results vary by surface condition, climate exposure, application method, and ongoing maintenance.

Documented by LEINOS India Specifier TeamUpdated 2026-05-16

Explore Interior Wood Solutions

More Projects

Interior Wood, elsewhere in India.

Browse all projects

For Architects & Contractors

Working on something similar? Specify .

Send us the project context — surface, area, finish intent, timeline. Our specifier team replies with a system spec and pack mix.

All Projects