Mineral Surface

Two-Tone Yellow Lime Paint Wall Application

in Jaipur, Rajasthan

Jaipur, Rajasthan2 photos

Interior wall in Jaipur — coated with LEINOS Anti-Mould Lime Paint 665 in vibrant golden-yellow using a roller. Deep saturated colour with subtle tonal variation.

Interior wall in Jaipur being coated with LEINOS Anti-Mould Lime Paint 665 in vibrant golden-yellow using a roller — three-coat build for target saturation.

Context

The brief, and the surface.

An interior wall coated with LEINOS Anti-Mould Lime Paint 665 in a vibrant golden-yellow shade, applied using a standard roller. The colour was chosen to read warm and high-saturation against Rajasthani warm-tone daylight without bleeding into the adjacent walls.

Yellow mineral pigments are particularly prone to settling — the team stirred the paint for 90 seconds before each roller load and re-stirred every 10 minutes during application. Three coats were needed to reach the target saturation; the final coat was back-rolled in a single direction to even out the texture.

Conditions on Site

Surface
Interior plastered mineral substrate — single feature wall
Climate & Exposure
Rajasthan desert indoor — climate-controlled, low humidity, hot summers
Limitations
  • Yellow pigments settle quickly — stir every 10 minutes during application
  • Saturation requires three coats — lime-paint colour builds subtly compared to acrylic

Gallery

More from the site.

  • Close-up of the yellow wall surface — subtle hand-applied tonal variation reading 'painted by hand' under Rajasthani daylight.

Outcome

The result on site.

Interior wall in Jaipur coated with LEINOS Anti-Mould Lime Paint 665 in vibrant golden-yellow — three-coat build reaches deep saturation with hand-applied tonal variation under Rajasthani daylight.

The wall shows a deep saturated yellow with subtle tonal variation from the roller application — the variation reads as 'painted by hand' rather than 'machine-coated' under Rajasthani afternoon light.

Results vary by surface condition, climate exposure, application method, and ongoing maintenance.

Documented by LEINOS India Specifier TeamUpdated 2026-05-16

For Architects & Contractors

Working on something similar? Specify .

Send us the project context — surface, area, finish intent, timeline. Our specifier team replies with a system spec and pack mix.

All Projects