Oil soaks into the grain
Penetrating natural oil travels into the wood’s open cells. The wood itself becomes the protection — no film on top, nothing to peel.

INTERIOR FOOD-CONTACT OIL · ART. 280
LEINOS 280 — WESSLING-tested for direct food contact. Open-pore penetrating oil for Indian kitchen worktops, butcher blocks, and family tables.
Mechanism & Use
Open-pore penetrating oil, tested for migration by a Lebensmittelchemikerin — safe under your child’s lunch plate, tough under your coffee mug.
Penetrating natural oil travels into the wood’s open cells. The wood itself becomes the protection — no film on top, nothing to peel.
Open-pore finish lets the wood respire. No plastic seal trapping moisture, no edge that cracks or chips with daily use.
Natural resin cross-links the oil into the wood fibre. Stain-resistant to coffee, red wine, fruit juice — without sealing the surface.
Tested by Lebensmittelchemikerin in Altenberge. Migration tests in vegetable oil, acetic acid, ethanol; GC-MS screening. Reg. (EG) 1935/2004 + LFGB compliance.
Where It Lives
Solid-wood kitchen worktops
Premium modular kitchens — oak, teak, sheesham. Daily prep, spill-tolerant, knife-friendly.
Butcher blocks + chopping boards
Direct food contact certified. Migration-tested in vegetable oil, acetic acid, ethanol.
Joint-family dining tables
Solid teak, sheesham, mango. Coffee mugs, hot bowls, fruit juice, kids’ meals.
Breakfast counters + open shelves
Open-pore finish for coffee + spice exposure. Wipe clean; re-oil any worn spot.
Children’s furniture
Cribs, high chairs, study desks. EN 71-3 migration class for surfaces kids touch.
Wooden toys + tactile play surfaces
Migration-tested under conditions a curious child’s mouth creates.
Compliance · EU · LFGB · WESSLING
Five anchors that let architects, parents, and chefs specify 280 without disclaimers.
Children’s Surfaces
Toy-safe — passes migration of elements for kids’ surfaces.
EU Food Framework
Materials and articles intended to come into contact with food.
German Food Law
Lebensmittel-, Bedarfsgegenstände- und Futtermittelgesetzbuch.
Lebensmittelchemiker
Tested by WESSLING GmbH, Altenberge. Valid through 29 July 2026.
Origin
Manufactured by Reincke Naturfarben, Lower Saxony.
Worn or stained spots can be re-oiled with a thin coat — no sanding, no contractor, no kitchen downtime. After 7-day cure the oil is fully bound to the wood and inert in food contact. The TDS is downloadable; the full WESSLING test report (Cert CAL24-0568511) is available to architects and contractors on request — use Get Expert Advice above.
Read The Full TDSStep by Step
Final-sand the worktop to 240 grit. Substrate must be dry (wood moisture < 14 %), solid, absorbent, clean, and free of resin and dust.

Open and stir 280 thoroughly before and during use. Work at ambient and surface temperature above 15 °C.

Apply coat 1 evenly with cloth, brush, or pad. Let the oil penetrate, then wipe off any excess before it dries.

Recoat after approx. 12 hours. Two coats minimum; additional coats may be applied on absorbent woods.

Ventilate thoroughly during application and drying. Dispose of oil-soaked rags in a sealed metal container or under water.

Wait 7 days before food contact. The worktop is touch-dry in 6–12 hours but reaches full migration-tested cure at one week.

Application Conditions
Coats & Recoating
Cleaning & Storage
First time with Countertop Oil? Our technical team runs complimentary on-site walkthroughs for contractors — full application protocol, start to finish.
System & Substrates
For floors, use LEINOS 290 Interior Hardwax Oil instead.
The Coating System
Primer plus topcoat — the full chain.
Long-term Care
Extends the life of the finish over the years.
Substrate Fit
Suitable
Honest Limits
Use With Care
Coverage & Pack Sizes
Coverage rate from TDS. Pack sizes from leinos.de German catalogue.
0.25L
Covers
25–40 sq ft
2 coats, absorbent wood
Best For
Small repair · single butcher block · child’s toy chest
0.75L
Covers
70–120 sq ft
2 coats, absorbent wood
Best For
One worktop · butcher block trio · standard high chair
2.5L
Covers
240–400 sq ft
2 coats, absorbent wood
Best For
Full modular kitchen worktop run · joint-family dining table set
Enter your floor area to see how many litres — and the most efficient pack mix — you’ll need for 2 coats.
Documented Applications
Recent projects finished with Countertop Oil. Factual captions, real footage — no staged photography.
Full Declaration
Every ingredient declared on the label. The Trust Hub explains what each one does and the standards behind it.
Natural Oils
Plant-derived drying-oil base — the carrier of LEINOS 280’s penetration. Soaks into wood’s cell structure and oxidatively polymerises with the substrate. The wood itself becomes the protective body — no separate film, nothing to peel.
Natural Resins
Plant-resin esters cross-link the oil into the cellulose matrix. Locks the oil in place under daily kitchen use without sealing the surface or forming a continuous film.
Aliphatic Hydrocarbons
Isoalkane solvent carrier (30–40 % per SDS). Evaporates fully during the 6–12-hour touch-dry phase, leaving only the cured oil-resin matrix bound to the wood. VOC max 360 g/L, EU Category f.
Driers
Manganese, zirconium, and zinc neodecanoates — catalysts that accelerate oxidative polymerisation of the oil. Trace concentrations (< 0.5 % combined per SDS). After 7-day cure the oil is fully bound and migration-tested inert in food contact.
Additives
Zinc oxide and zinc carbonate — trace stabilisers (< 2 % combined per SDS). Support shelf life and even cure across hardwoods and softwoods.
Got Questions?
Quick answers on formulation, application and Indian-climate suitability. Pulled from our full FAQ and TDS library.
For Architects & Specifiers
Technical and safety documents — citable in project specifications.
Need a Recommendation?
Four ways to reach our India team — pick the one that fits how you work.
Written by the LEINOS India technical team, in collaboration with Reincke Naturfarben R&D, Lower Saxony.
Want to represent LEINOS in your city?
Become a Dealer